Douglas Fir Wood Veneer Edgebanding with Preglued Hot Melt Adhesive

Douglas Vertical Grade Fir wood veneer edgebanding 1/40” thickness with preglued hot melt adhesive. Product has a very thin layer of fleece in between the wood and the glue that holds the product together at the joints. Joints are staggered and blend well. Usually about every six feet.  Pictures are representative of the product which will vary in color and grain. Photos may also show other sizes and wet or finished veneer to show the affect of finishing and the ensuing color change. Product is unfinished. This is the ideal product to cover edges and other surfaces. It is a very durable and long lasting bond. Application utilizes a heat gun, household iron or hair dryer to activate the adhesive. It is best to use a size that is slightly over the size that needs to be covered, although it is possible to use the exact size. Apply even pressure while the product begins to cool and then trim with edgeband trimmer, utility knife or sand off excess. Also available edgebanding trimmer tool and veneer scraper tool which are very convenient and helpful, but not necessary to apply this product. These can be found in the tools and adhesives section of our website. Also available in nonglued and thicker options. This product usually ships within 24-48 hours.

Roll lengths: 10′ feet – 25′ feet – 50′ feet – 100′ feet – 250′ feet

Roll widths: From 1/2″ to 6″