Birch, White Wood Veneer Edgebanding Thick

Birch White thick wood veneer edgebanding. Thick edgebanding includes all edgebanding that is 1mm-2mm-3mm in thickness. This product is a layered product that has a consistent color on inner layers but usually is not made of the same wood as the surface veneer. This is the only way to make the product flexible so it can be rolled and shipped. Can be applied manually with contact cement and other adhesives or with automatic edgebander machines. It is not available with adhesive. The product may retain some “memory” from its rolled form, but will straighten enough to be applied. Makes a beautiful edge that is often desired over thin wood edgebanding, which is .020″ or 1/2 mm in thickness and also available in another subcategory. Photographs are representative of the color and grain and will vary within reason. Some photos may show wet or finished veneer. Product is unfinished. Most wood stains and finishes can be used.

ROLL THICKNESS:

1mm = .040″
1.5mm = .060″
2mm = .080″
3mm = .120″

ROLL WIDTHS:

7/8″
15/16″
1-1/8″
1-3/8″
1-3/4″
2″

ROLL LENGTHS:

10′ feet
25′ feet
50′ feet
100′ feet
328′ feet