Jet-Ply I, II, & III Jet-Ply I - This is a 10 mil paper-backed veneer used primarily for edges and tight radiuses, though some customers use this product exclusively. It is very flexible and easy to trim. It is not a fire-treated product. This product is capable of passing burn tests with a fire retardant finish additive. It is the thinnest of the three products we offer at .025” +/- .005”. We can add up to two additional paper backers. The addition of one paper backing would result in a thickness of .035” +/- .005”. Two additional backers would result in a thickness of .045” +/- .005”. Jet-Ply II - This is a fire-treated product. The wood backer is treated in order to assist in passing burn tests. This product is less flexible (thicker) than Jet-Ply I, but more flexible (thinner) than Jet-Ply III. It is normally about .035” +/- .010”. Jet-Ply II offers a directionally cross-grain backer for maximum flexibility and reduced shipping costs. It is currently our most popular product. Jet-Ply III - This also is a fire-treated product. It has two wood backers that are fire-treated in order to assist in passing burn tests. Again, we always recommend a fire-retardant finish additive for protection of the “face” or front layer of veneer. This is our thickest product at .065” +/- .0100”. This product is the least flexible and often ships flat on skids. Sizes: We offer standard 4’ x 8’ sheets or cut-to-size sheets (especially in Burls). Blueprint matches are available with proper corresponding details. Lead times: Our lead times vary according to species, quantities, sizes, and other factors such as customer specifications. We can usually ship within 1-2 weeks. Samples: Most species are readily available for sample purposes. We generally require sample approval before production. Some samples can be viewed via the Internet with our digital camcorder. We offer a variety of sample books with 25-100 species. Please call for pricing and availability. Pricing: We now offer a complete price list by species, grade and backer. Prices are subject to change without prior notification due to the volatility of the veneer market and current stock. FAR Burn tests: We always recommend a fire-retardant finish additive to provide protection to the “face” or front layer of veneer. Please refer to our burn test information document.